How to Clean a Dryer Vent?

Dryer vent cleaning can be a daunting task. However, it is still a necessary task that
should never be postponed, since a dirty vent is a fire hazard. If you have a budget
constraint, then you can clean your dryer vent yourself. Here is how you can do so:

– Locate the Vent Ends

The first thing you need to do to start the dryer vent cleaning process is to
locate the two ends of the dryer vent.

– Disconnect the Dryer

Once you have located the ducts, ensure that your dryer is safely
disconnected. This is a key step, especially if your dryer is powered by
natural gas.

– Open Up the Inner Ductwork

Remove the vent pipe from the dryer and the cover from the exit point. This
way, the entire ductwork is now open and you can access it more easily.

– Clean the Ductwork with a Vent Brush

This is a special type of brush that you will need to buy at the hardware
store. It is a kit that comes equipped with a lint brush and a segmented
handle. You can remove or add segments depending on the length of your
dryer vent.
To being the dryer vent cleaning process, insert the segmented vent brush as
far as possible into the vent and turn it counter-clockwise. The brush will
loosen the lint that is stuck to the sides of the vent.
Tip: Start the dryer vent cleaning process from the outside, so that the debris
lands on the inside of your laundry room. It’s easier to vacuum away the lint
then.

– Final Vacuum

Use the vacuum cleaner to finish off the dryer vent cleaning process. Also,
clean the lint trap housing.

– Put it All Together Again

After the dryer vent cleaning, reconnect all the parts of the dryer.